As a general contractor and remodeling company based in Birmingham, AL that’s completed a lot of roof repair and wood rot projects, we understand the importance of a well-built roof. One of the most crucial components of any roof is the flashing. Today we thought we’d answer some common questions about this often overlooked part of your home’s construction.
What is a flashing on a roof?
A roof flashing is a thin strip of metal or other material that is installed on the roof where two surfaces meet. These surfaces can include where the roof meets a wall, a chimney, a vent pipe, or any other structure that penetrates the roof.
What is the purpose of a roof flashing?
The purpose of a roof flashing is to prevent water from penetrating into the building through the joints or gaps between the roof and the other structure. Flashing directs water away from these areas and ensures that it flows down the roof and into the gutters, rather than seeping into the building and causing water damage.
Is a roof flashing the same thing as a drip edge?
No, a roof flashing is not the same thing as a drip edge. A drip edge is a metal strip that is installed along the edges of the roof to prevent water from running down the fascia and onto the soffit. While both a roof flashing and a drip edge are important components of a well-built roof, they are different components and serve different purposes.
Does flashing go over or under shingles?
Flashing should be installed under the shingles or other roofing material. This ensures that water flows down the flashing and onto the roof, rather than seeping in between the flashing and the shingles.
What are the different types of roof flashing?
There are several different types of roof flashing, including:
-
Step flashing: This type of flashing is used where a sloped roof meets a vertical wall, such as around a chimney.
-
Continuous flashing: This is a long strip of metal that is installed along the entire length of a roof intersection, such as where two sloped roofs meet.
-
Vent pipe flashing: This type of flashing is used where a vent pipe penetrates the roof.
-
Drip edge flashing: As we mentioned earlier, this type of flashing is installed along the edge of the roof to prevent water from running down the fascia and onto the soffit.
What problems can occur because of badly installed roof flashing?
Badly installed roof flashing can lead to several, usually very expensive, problems, including, but not limited to:
-
Water damage: If flashing is installed improperly, water can seep in between the flashing and the roof or other structure, causing water damage to the building.
-
Leaks: Similarly, poorly installed flashing can allow water to seep into the building, leading to leaks.
-
Wood Rot: Over time, water damage can cause wood to rot, leading to structural damage to the building.
At Reliable Design-Build-Remodel, we know how important it is to install roof flashing correctly. If you’re experiencing issues with your roof or suspect that your flashing may be improperly installed, don’t hesitate to give us a call. Our team of experienced professionals can inspect your roof and provide recommendations for repair or replacement as needed.
We hope this article has been informative and helpful in understanding the importance of roof flashing. If you have any further questions or concerns, please don’t hesitate to reach out to us at Reliable Design-Build-Remodel.
